Prime Iranian polypropylene granules – injection, raffia, fibre, sheet and PPRC pipe grades – with open datasheets and today’s rate for Pakistan.
In Karachi rate lists polypropylene dana is quoted as Polypropylene Injection, Polypropylene Raffia, Polypropylene Copolymer and Polypropylene Random Copolymer (PPRC). The grades below follow the same groups.
Choose your process: Injection Fibre & filament Raffia & tape PP-R pipe Sheet
PP 440G – Sheet & Thermoforming Grade
PP 440G is a nucleated heterophasic copolymer developed for sheet extrusion, thermoforming and corrugated board.
- MFR 1.3 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Sheet Extrusion
PP 440L – Injection Moulding Grade
PP 440L is a medium-flow heterophasic copolymer combining high stiffness with outstanding low-temperature impact strength.
- MFR 6 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Injection
PP 548R – Thin-Wall Injection Grade
PP 548R is a nucleated, antistatic, high-fluidity heterophasic copolymer for thin-wall injection moulding.
- MFR 21 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Injection
PP 552R – Fibre & Filament Grade
PP 552R is a high-melt-flow homopolymer for CF, BCF and fine-denier staple fibres, with excellent anti-gas-fading properties.
- MFR 26 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Fibre
PP HP500M – Injection Moulding Grade
PP HP500M is a polypropylene homopolymer for injection moulding whose good flow gives easy processing and high-stiffness articles.
- MFR 9 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Injection
PP HP550J – Raffia & Film Yarn Grade
PP HP550J is a polypropylene homopolymer particularly suitable for film yarn (raffia), monofilament and sheet for thermoforming.
- MFR 3.2 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Raffia / Tape
PP RP340R – Clarified Injection Grade
PP RP340R is a nucleated random copolymer with high fluidity and outstanding transparency and gloss for injection moulding and ISBM.
- MFR 25 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Injection
PP Z30S – Fibre & Filament Grade
PP Z30S is a high-melt-flow homopolymer for low-denier BCF, CF and staple fibres at medium to high spinning speeds.
- MFR 25 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Fibre Spinning
PP-R MR230C – Hot & Cold Water Pipe Grade
PP-R MR230C is a polypropylene random copolymer designed for hot and cold water supply systems and industrial water conveyance.
- MFR 0.8 – 1.3 g/10 min 230 °C / 5 kg
- Specific Gravity 0.89
- Process Pipe Extrusion
PP-R ZR230C – Pressure & Heating Pipe Grade
PP-R ZR230C is a high-molecular-weight random copolymer for pressure, heating and underfloor pipes.
- MFR 0.35 g/10 min 230 °C / 2.16 kg
- Density 0.90 g/cm³
- Process Pipe Extrusion
Polypropylene granules from Iran – buyer’s guide for Pakistan
Pakistan imports all of its polypropylene – roughly as much as its polyethylene. The largest uses are raffia for woven sacks, injection moulding for furniture and packaging, fibre and nonwovens, and PPRC plumbing pipe. Rabin Polymer supplies prime Iranian PP grades for each of these processes, with a datasheet and an open specification table for every grade.
Choose by process
| Process / Karachi label | Grades | MFR (230 °C / 2.16 kg) | Typical products |
|---|---|---|---|
| Polypropylene Raffia | HP550J | about 3 | Woven sacks, FIBC, strapping |
| Polypropylene Injection | 548R, 440L, HP500M, RP340R | 6–25 | Furniture, thin-wall packaging, housewares |
| PP fibre / nonwoven | Z30S, 552R | about 25 | Spunbond nonwoven, staple fibre |
| PP sheet | 440G | about 1.3 | Sheet, trays, flute board |
| PPRC | MR230C, ZR230C | below 1 | Hot and cold water pipe |
Why melt flow matters for PP
PP grades are separated mainly by melt flow. Raffia tape needs a low MFR (about 2–5) so the film can be slit and stretched; fibre and thin-wall injection need a high MFR (20–30); pipe and sheet need a very low MFR for melt strength. Using a fibre grade with MFR 25 on a raffia line will break the tapes – always match the grade code and MFR to your process.
Homopolymer, impact copolymer or random copolymer?
- Homopolymer: stiff and economical – raffia, fibre, general injection.
- Impact copolymer: tough at low temperature – chairs, crates, buckets.
- Random copolymer: clear and flexible – transparent containers and PPRC pipe.
Market overview
The largest single use of PP in Pakistan is raffia for woven sacks – cement, fertiliser, rice, sugar and flour are all packed in PP bags. Injection moulding for furniture and packaging comes next, followed by nonwovens, fibre and PPRC pipe. Karachi and Lahore are the main trading centres, and PP rates move with regional propylene prices and freight.
What to check before you buy
- The grade code and MFR must match your process – raffia, fibre, injection and pipe grades are not interchangeable.
- Homopolymer or copolymer – important for impact strength.
- Lot certificate values against the datasheet.
- Original producer bags, dry and undamaged on pallets.
Grade notes
PP HP550J – PP HP550J is a polypropylene homopolymer particularly suitable for film yarn (raffia), monofilament and sheet for thermoforming. Films are converted into stretched tapes for woven sacks, carpet backing, industrial fabrics and artificial grass, or into twines and ropes. Suitable for food contact. Key strengths: raffia & tape grade, good mechanical properties, good processability. In Pakistan it is used for woven sacks for cement, fertiliser, rice, sugar and flour, FIBC bags and strapping.
PP 440L – PP 440L is a medium-flow heterophasic copolymer with an improved balance of mechanical properties: high stiffness and outstanding low-temperature impact strength for injection moulding. It delivers about 35% higher toughness than conventional copolymers of the same MFR and rigidity. Key strengths: high stiffness, outstanding low-temp impact, ≈ 35% higher toughness. In Pakistan it is used for plastic chairs and tables, crates, buckets and impact-resistant housewares.
PP 548R – PP 548R is a nucleated, antistatic, high-fluidity heterophasic copolymer for thin-wall injection moulding. Items show high stiffness, good impact resistance and excellent antistatic behaviour; excellent mouldability and short cycle times allow high productivity. Suitable for food contact. Key strengths: high fluidity, short cycles, high stiffness, excellent antistatic. In Pakistan it is used for thin-wall food containers, disposable cups, lids and fast-cycle packaging.
PP Z30S – PP Z30S is a high-melt-flow homopolymer for low-denier BCF, CF and staple fibres at medium to high spinning speeds. It offers high homogeneity, stable extrusion and a high stretch ratio, giving tough, resilient fibres. Suitable for food contact. Key strengths: high melt flow, stable extrusion, high stretch ratio. In Pakistan it is used for spunbond nonwoven fabric, staple fibre and multifilament yarn.
PP-R MR230C – PP-R MR230C is a polypropylene random copolymer designed for hot and cold water supply systems and industrial water conveyance. It offers excellent creep properties and processability by both extrusion and injection moulding. Key strengths: excellent creep resistance, hot & cold water, long-term heat ageing. In Pakistan it is used for PPRC hot and cold water pipes and fittings.
Supply to Pakistan
We ship polypropylene granules from Iran in 25 kg bags on pallets (jumbo bags on request). Sea freight goes in 20′ and 40′ containers from Bandar Abbas to Karachi or Port Qasim; inland buyers can also receive trucks via Taftan. The shipping mode, route and Incoterm are agreed for each order, depending on quantity, destination and timing. Every shipment travels with a commercial invoice, packing list, certificate of origin and the producer datasheet.
Need a rate? Send the grade, quantity and city on WhatsApp or use the enquiry form – we reply within one business day. You can also join our free weekly rate list for Pakistan.
Frequently asked questions
Which PP grade is used for woven sacks?
A raffia grade with MFR around 3, such as PP HP550J. Fibre grades with MFR 25 are not suitable for raffia tape.
Which PP grade is used for plastic chairs?
An impact copolymer such as PP 440L.
Who produces PP in Iran?
Iranian PP grades are produced by Jam Polypropylene (Jampilen), Shazand (Arak), Marun, Navid Zar Shimi and others; each product page lists the producers of that grade.
Is the material prime?
Yes – all PP grades on this site are prime, virgin material in the producer’s original 25 kg bags.
