HDPE BL3 – Blow Moulding Grade

HDPE BL3 is a blow moulding grade with 1-butene comonomer for small containers up to 10 litres.

MFR 1.2 g/10 min 190 °C / 5 kg
Density 0.954 g/cm³
Process Blow Moulding

Download Technical Data Sheet (PDF) Get rate

Reply within one business day on WhatsApp or email
Sea to Karachi or Port Qasim, road via Taftan
Producer, lot and packing confirmed in every offer

Weekly rate listIranian PE & PP rates for Pakistan every Monday – free.Join on WhatsApp Telegram

SKU: RP-HDPE-BL3 Category: HDPE Blow Moulding Grade

HDPE BL3 is a blow moulding grade with 1-butene comonomer. High rigidity and an excellent balance of stiffness and environmental stress-crack resistance make it ideal for detergent and medicine bottles and all bottles and small containers below 5 litres.

HDPE BL3 Technical Data

Property	Test Method	Unit	Typical Value
Physical
Melt Flow Rate (190 °C / 21.6 kg)	ISO 1133	g/10 min	23
Melt Flow Rate (190 °C / 5 kg)	ISO 1133	g/10 min	1.2
Flow Rate Ratio (21.6 / 5)	—	—	19
Density	ISO 1183	g/cm³	0.954
Swell Ratio	MPC test	%	120
Mechanical
Notched Impact Strength (23 °C)	ISO 179/1eA	kJ/m²	10
Flexural Creep Modulus (4-point, 1 min)	DIN 19537-2	MPa	1300
Tensile Modulus (23 °C, secant)	ISO 527	MPa	1250
Stress at Break	ISO 527	MPa	32
Elongation at Break	ISO 527	%	> 600
Hardness, Shore D	ISO 868	—	62

Typical values, not to be construed as specification limits. Download the HDPE BL3 technical data sheet (PDF).

Key Features

High density & stiffness
Good flow & impact strength
Good stress-crack resistance
Food-contact grade

Iranian producers of HDPE BL3

HDPE BL3 is produced in Iran by Marun Petrochemical (HF4760 / BL3), Kermanshah Polymer (Bakhtar) (BL3) and Amir Kabir Petrochemical (BL3). Rabin Polymer is an independent supplier and exporter, not an official agent of these producers – the producer, lot and packing of each shipment are confirmed in the offer.

Applications

Typical applications of HDPE BL3:

HDPE BL3 for Plastic Containers — Plastic Containers

HDPE BL3 for Medicine Bottles — Medicine Bottles

Processing Guide

Process: Extrusion blow moulding
Melt temperature: 180 – 210 °C
Container size: Few ml – 5 L
Swell ratio: 120 %

HDPE BL3 for buyers in Pakistan

In Karachi rate lists this grade trades under HDPE Blow Moulding (prime, virgin plastic dana). Converters in Pakistan use HDPE BL3 for detergent, shampoo, edible-oil and medicine bottles up to 5 litres. Comparing grades? See also HDPE 0035.

Sea: 20′ / 40′ containers from Bandar Abbas to Karachi or Port Qasim
Road: trucks via Taftan for inland buyers
Packing: 25 kg PE or woven bags, palletised; jumbo bags on request
Documents: commercial invoice, packing list, certificate of origin and the producer datasheet

The shipping mode, route and Incoterm are agreed for each order, depending on quantity, destination and timing.

HDPE BL3 – frequently asked questions

What is the melt flow rate of HDPE BL3?

Typical MFR at 190 °C / 5 kg: 1.2 g/10 min; density 0.954 g/cm³. Full values are in the table above and in the TDS PDF.

Who produces HDPE BL3 in Iran?

Marun Petrochemical, Kermanshah Polymer (Bakhtar) and Amir Kabir Petrochemical. We confirm the producer for each lot.

How do I get today’s HDPE BL3 rate in Pakistan?

Send the grade, quantity and destination (for example Karachi, Lahore or Faisalabad) on WhatsApp or use the enquiry form. We reply within one business day. For a weekly overview, join our free weekly rate list.

Request a Quote

Tell us the grade, quantity and destination – we reply with price, availability and delivery terms within one business day. Samples and full export documents are available on request.

Talk to Sales

Road, sea or rail – shipping mode agreed per order · Pre-shipment inspection on request · Full export documents