HDPE 3840 (HD3840UA) – Rotational Moulding Grade
HDPE 3840 (HD3840UA) is a UV-stabilised butene copolymer for rotational moulding of tanks and large containers.
- MFR 4 g/10 min 190 °C / 2.16 kg
- Density 0.938 g/cm³
- Process Rotomoulding
- Reply within one business day on WhatsApp or email
- Sea to Karachi or Port Qasim, road via Taftan
- Producer, lot and packing confirmed in every offer
HDPE 3840 (HD3840UA) is a UV-stabilised butene copolymer for rotational moulding of tanks and large containers.
HDPE 3840 Technical Data
| Property | Test Method | Unit | Typical Value |
|---|---|---|---|
| Physical | |||
| Melt Flow Rate (190 °C / 2.16 kg) | ASTM D1238 | g/10 min | 4 |
| Density | ASTM D1505 | g/cm³ | 0.938 |
| Thermal | |||
| Vicat Softening Point | ASTM D1525 | °C | 115 |
| Melting Point | ASTM D2117 | °C | 127 |
| Mechanical | |||
| Tensile Stress at Yield | ASTM D638 | MPa | 15 |
| Elongation at Break | ASTM D638 | % | 900 |
| Flexural Modulus | ASTM D790 | MPa | 650 |
| Charpy Notched Impact (23 °C) | ASTM D6110 | kJ/m² | 18 |
| Other | |||
| ESCR (10% Igepal, F50) | ASTM D1693 | h | 200 |
Typical values from the producer’s published data sheet. Values marked min or max are specification limits. Ask for the certificate of analysis of the lot on offer.
Key Features
- UV stabilised
- Good impact strength
- Easy demoulding
- Good surface finish
Iranian producers of HDPE 3840
HDPE 3840 is produced in Iran by Tabriz Petrochemical (HD3840UA). Rabin Polymer is an independent supplier and exporter, not an official agent of these producers – the producer, lot and packing of each shipment are confirmed in the offer.
Applications
- Water and septic tanks
- Recycling bins
- Large containers
- Rotomoulded parts
Processing Guide
- Process: Rotational moulding
HDPE 3840 for buyers in Pakistan
In Karachi rate lists this grade trades under HDPE Rotomoulding (prime, virgin plastic dana). Ask for the rate CFR Karachi or for road delivery via Taftan.
- Sea: 20′ / 40′ containers from Bandar Abbas to Karachi or Port Qasim
- Road: trucks via Taftan to Pakistan, and via Turkmenistan to Central Asia
- Packing: 25 kg bags, palletised; jumbo bags on request
- Documents: commercial invoice, packing list, certificate of origin and the producer datasheet
HDPE 3840 FAQ
What is HDPE 3840 used for?
Water and septic tanks, Recycling bins, Large containers and Rotomoulded parts.
Who produces HDPE 3840 in Iran?
Tabriz Petrochemical. We confirm the producer for each lot.
How do I get today’s HDPE 3840 rate?
Send the grade, quantity and destination on WhatsApp or use the enquiry form. We reply within one business day.
We reply within one business day.
Request a Quote
Tell us the grade, quantity and destination – we reply with price, availability and delivery terms within one business day. Samples and full export documents are available on request.
Talk to Sales
- WhatsApp: +98 912 640 4020
- Email: sales@rabinpolymer.com
- WhatsApp: +98 912 859 5824
- Tel: +98 21 25903
- Tel: +98 21 2611 6515
- Office: Coral Tower, 7th Kouhestan St, Pasdaran, Tehran
- Factory: Eyvanaki Industrial Zone, Semnan province
- Dubai office: Rasis Business Centre, Al Barsha 1, Dubai, UAE
- Tel / WhatsApp (UAE): +971 58 687 5544
Road, sea or rail – shipping mode agreed per order · Pre-shipment inspection on request · Full export documents
Related products
HDPE 52B18 – Thin-Wall Injection Grade
HDPE 52B18 is a butene-copolymer HDPE injection grade with easy processing, high rigidity and strength for general purpose and thin-walled containers.
- MFR 15 – 21 g/10 min 190 °C / 2.16 kg
- Density 0.951 – 0.953 g/cm³
- Process Injection
HDPE 54B04 UV – Injection Grade for Crates
HDPE 54B04 is a UV-resistant HDPE injection grade with high rigidity and easy processing for crates, pallets, seats and boxes.
- MFR 3.2 – 4.8 g/10 min 190 °C / 2.16 kg
- Density 0.950 – 0.958 g/cm³
- Additive UV
HDPE 5510 (HBM5510) – Large Blow Moulding Grade
HDPE 5510 (HBM5510) is a hexene-copolymer HDPE for large blow-moulded parts such as jerry cans and open-top drums, with high stiffness and good ESCR.
- HLMI 10 g/10 min 190 °C / 21.6 kg
- Density 0.955 g/cm³
- ESCR 90 h
HDPE 60507 UV – Injection Moulding Grade
HDPE 60507 (HD-60507/UV) is a gas-phase HDPE homopolymer injection grade with good flow and high stiffness for crates and general purpose parts.
- MFR 7.5 g/10 min
- Density 0.958 g/cm³
- Additive UV
HDPE HI500 (HI0500) – Injection Moulding Grade
HDPE HI500 (HI0500) is a natural HDPE injection grade that combines high stiffness with good physical properties for crates and thick-wall parts.
- MFR 4 – 6 g/10 min 190 °C / 2.16 kg
- Density 0.963 – 0.967 g/cm³
- Process Injection
