HDPE 52518 – Injection Moulding Grade
HDPE 52518 is a high-flow HDPE copolymer for injection moulding, offering a good balance between easy processing, flowability and mechanical properties.
- MFR 18 g/10 min 190 °C / 2.16 kg
- Density 0.952 g/cm³
- Process Injection
- Reply within one business day on WhatsApp or email
- Sea to Karachi or Port Qasim, road via Taftan
- Producer, lot and packing confirmed in every offer
It is widely used for housewares, toys and flower pots.
HDPE 52518 Technical Data
| Property | Test Method | Unit | Typical Value |
|---|---|---|---|
| Physical | |||
| Melt Flow Index (190 °C / 2.16 kg) | ASTM D1238 | g/10 min | 18 |
| Density | ASTM D1505 | g/cm³ | 0.952 |
| Mechanical | |||
| Flexural Modulus | ASTM D790 | MPa | 1200 |
| Izod Impact Strength, notched (23 °C) | ASTM D256 | J/m | 19 |
| Thermal | |||
| Vicat Softening Point | ASTM D1525 | °C | 121 |
Typical values, not to be construed as specification limits. Download the HDPE 52518 technical data sheet (PDF).
Key Features
- High fluidity
- Easy processing
- Balanced stiffness & impact
- Short cycle times
Iranian producers of HDPE 52518
HDPE 52518 is produced in Iran by Jam Petrochemical (HD52518). Rabin Polymer is an independent supplier and exporter, not an official agent of these producers – the producer, lot and packing of each shipment are confirmed in the offer.
Applications
Typical applications of HDPE 52518:
Processing Guide
- Process: Injection moulding
- Melt temperature: 180 – 240 °C
- Mould temperature: 20 – 40 °C
- Form: Natural pellets
HDPE 52518 for buyers in Pakistan
In Karachi rate lists this grade trades under HDPE Injection (prime, virgin plastic dana). Converters in Pakistan use HDPE 52518 for caps and closures, thin-wall housewares and small injection parts. Comparing grades? See also HDPE 62N07.
- Sea: 20′ / 40′ containers from Bandar Abbas to Karachi or Port Qasim
- Road: trucks via Taftan for inland buyers
- Packing: 25 kg PE or woven bags, palletised; jumbo bags on request
- Documents: commercial invoice, packing list, certificate of origin and the producer datasheet
The shipping mode, route and Incoterm are agreed for each order, depending on quantity, destination and timing.
HDPE 52518 – frequently asked questions
What is the melt flow rate of HDPE 52518?
Typical MFI at 190 °C / 2.16 kg: 18 g/10 min; density 0.952 g/cm³. Full values are in the table above and in the TDS PDF.
Who produces HDPE 52518 in Iran?
Jam Petrochemical. We confirm the producer for each lot.
How do I get today’s HDPE 52518 rate in Pakistan?
Send the grade, quantity and destination (for example Karachi, Lahore or Faisalabad) on WhatsApp or use the enquiry form. We reply within one business day. For a weekly overview, join our free weekly rate list.
We reply within one business day.
Request a Quote
Tell us the grade, quantity and destination – we reply with price, availability and delivery terms within one business day. Samples and full export documents are available on request.
Talk to Sales
- WhatsApp: +98 912 640 4020
- Email: sales@rabinpolymer.com
- WhatsApp: +98 912 859 5824
- Tel: +98 21 25903
- Tel: +98 21 2611 6515
- Office: Coral Tower, 7th Kouhestan St, Pasdaran, Tehran
- Factory: Eyvanaki Industrial Zone, Semnan province
- Dubai office: Rasis Business Centre, Al Barsha 1, Dubai, UAE
- Tel / WhatsApp (UAE): +971 58 687 5544
Road, sea or rail – shipping mode agreed per order · Pre-shipment inspection on request · Full export documents
Related products
HDPE 62N07 – Injection Moulding Grade
HDPE 62N07 is an injection moulding grade with good impact strength, easy processing, high rigidity and UV resistance.
- MFR 7 g/10 min 190 °C / 2.16 kg
- Density 0.962 g/cm³
- Process Injection
HDPE 52B18 – Thin-Wall Injection Grade
HDPE 52B18 is a butene-copolymer HDPE injection grade with easy processing, high rigidity and strength for general purpose and thin-walled containers.
- MFR 15 – 21 g/10 min 190 °C / 2.16 kg
- Density 0.951 – 0.953 g/cm³
- Process Injection
HDPE 54B04 UV – Injection Grade for Crates
HDPE 54B04 is a UV-resistant HDPE injection grade with high rigidity and easy processing for crates, pallets, seats and boxes.
- MFR 3.2 – 4.8 g/10 min 190 °C / 2.16 kg
- Density 0.950 – 0.958 g/cm³
- Additive UV
HDPE 60507 UV – Injection Moulding Grade
HDPE 60507 (HD-60507/UV) is a gas-phase HDPE homopolymer injection grade with good flow and high stiffness for crates and general purpose parts.
- MFR 7.5 g/10 min
- Density 0.958 g/cm³
- Additive UV
HDPE HI500 (HI0500) – Injection Moulding Grade
HDPE HI500 (HI0500) is a natural HDPE injection grade that combines high stiffness with good physical properties for crates and thick-wall parts.
- MFR 4 – 6 g/10 min 190 °C / 2.16 kg
- Density 0.963 – 0.967 g/cm³
- Process Injection
