PP 440L – Injection Moulding Grade

PP 440L is a medium-flow heterophasic copolymer combining high stiffness with outstanding low-temperature impact strength.

MFR 6 g/10 min 230 °C / 2.16 kg
Density 0.90 g/cm³
Process Injection

Download Technical Data Sheet (PDF) Get rate

Reply within one business day on WhatsApp or email
Sea to Karachi or Port Qasim, road via Taftan
Producer, lot and packing confirmed in every offer

Weekly rate listIranian PE & PP rates for Pakistan every Monday – free.Join on WhatsApp Telegram

SKU: RP-PP-440L Category: PP Injection Moulding Grade

PP 440L is a medium-flow heterophasic copolymer with an improved balance of mechanical properties: high stiffness and outstanding low-temperature impact strength for injection moulding. It delivers about 35% higher toughness than conventional copolymers of the same MFR and rigidity.

PP 440L Technical Data

Property	Test Method	Unit	Typical Value
Physical
Melt Flow Rate (230 °C / 2.16 kg)	ASTM D1238	g/10 min	6
Density	ASTM D1505	g/cm³	0.90
Mechanical
Flexural Modulus	ASTM D790	MPa	1200
Tensile Strength at Yield	ASTM D638	MPa	23
Tensile Elongation at Yield	ASTM D638	%	5
Izod Impact, notched (23 °C)	ASTM D256	J/m	500
Izod Impact, notched (−20 °C)	ASTM D256	J/m	60
Thermal
Vicat Softening Point (B/120)	ASTM D1525	°C	145
HDT (0.45 MPa)	ASTM D648	°C	87
Oven Ageing in Air (150 °C)	ASTM D3012	h	360

Typical values, not to be construed as specification limits. Download the PP 440L technical data sheet (PDF).

Key Features

High stiffness
Outstanding low-temp impact
≈ 35% higher toughness
Heterophasic copolymer

Iranian producers of PP 440L

PP 440L is produced in Iran by Jam Polypropylene (Jampilen) (EP440L). Rabin Polymer is an independent supplier and exporter, not an official agent of these producers – the producer, lot and packing of each shipment are confirmed in the offer.

Applications

Typical applications of PP 440L:

PP 440L for Paint Pails & Buckets — Paint Pails & Buckets

PP 440L for Crates & Containers — Crates & Containers

PP 440L for Battery Cases — Battery Cases

PP 440L for Luggage & Large Toys — Luggage & Large Toys

Processing Guide

Process: Injection moulding
Melt temperature: 210 – 260 °C
Mould temperature: 20 – 50 °C
Form: Natural pellets

PP 440L for buyers in Pakistan

In Karachi rate lists this grade trades under Polypropylene Injection (prime, virgin plastic dana). Converters in Pakistan use PP 440L for plastic chairs and tables, crates, buckets and impact-resistant housewares. Comparing grades? See also PP HP500M or PP 548R.

Sea: 20′ / 40′ containers from Bandar Abbas to Karachi or Port Qasim
Road: trucks via Taftan for inland buyers
Packing: 25 kg PE or woven bags, palletised; jumbo bags on request
Documents: commercial invoice, packing list, certificate of origin and the producer datasheet

The shipping mode, route and Incoterm are agreed for each order, depending on quantity, destination and timing.

PP 440L – frequently asked questions

What is the melt flow rate of PP 440L?

Typical MFR at 230 °C / 2.16 kg: 6 g/10 min; density 0.90 g/cm³. Full values are in the table above and in the TDS PDF.

Who produces PP 440L in Iran?

Jam Polypropylene (Jampilen). We confirm the producer for each lot.

How do I get today’s PP 440L rate in Pakistan?

Send the grade, quantity and destination (for example Karachi, Lahore or Faisalabad) on WhatsApp or use the enquiry form. We reply within one business day. For a weekly overview, join our free weekly rate list.

Request a Quote

Tell us the grade, quantity and destination – we reply with price, availability and delivery terms within one business day. Samples and full export documents are available on request.